파워서플라이

IT2700 series multi-channel modular power system brings ultra-high power density. The 1U mainframe can include up to 8 modules (200W each) or 4 modules (500W each). Different modules can be grouped and synchronized. The modules could be bidirectional DC power supplies, DC power supplies or regenerative loads. And they can be connected with each other in parallel. They have built-in LAN, USB, CAN, digital I/O and free PC software. It can be widely used in ATE integration in R&D, design verification and manufacturing of DC-DC converter, communication power semiconductors, 3C products, like smartphone, PCBA, battery simulation and test, chips BMS chips etc.

The IT-N6300 Series is a high-performance triple-output DC power supply from ITECH, housed in a compact 2U half-rack chassis. Each channel operates independently, with series/parallel and synchronization capabilities for versatile testing needs. A 4.3-inch high-resolution LCD offers intuitive control for parameter setting, test programming, and waveform monitoring. High-resolution output (1 mV/0.1 mA) ensures precise voltage and current delivery.

IT-N6700 시리즈 프로그래머블 DC 전원 공급 장치는 CC/CV 우선순위 기능을 지원하여 DUT의 다양한 부하 특성에 맞출 수 있습니다. CV 우선순위를 선택하면 전압 상승 및 정상 상태 수렴 속도가 빨라져 빠른 전압 응답이 요구되는 환경에 적합합니다. CC 우선순위를 선택하면 피크 전류가 효과적으로 제한되고 돌입 전류가 억제되어 서지에 민감한 장치 및 부하를 보호합니다. 우선순위를 적절히 설정하면 루프 안정성, 테스트 반복성 및 DUT 안전성이 크게 향상됩니다.

The IT2800 Series are compact and cost-effective bench-top Source Measure Units (SMUs) with the capability to source and measure both voltage and current. The IT2800 Series combine the capabilities of a voltage source, a current source, a voltage meter, a current meter and an ohmmeter (along with the capability to switch easily between these various functions).This ensures the independent measurement of IV characteristic in 4-quadrant. With a current range of 10fA to 10A and a voltage range of100nV to 1000V, the IT2800 series SMU has capabilities that allow it to perform more than just simple DC and pulsed measurements to prevent errors inmeasurement results due to the device's own heating. Excellent Front Panel GUI with 5 inch touch display supports various view modes, to help engineers significantly improve the efficiency of testing. The IT2800 Series is suitable for a variety of test applications: discrete semiconductor devices, passive devices, transient suppression devices, laser diodes, TVS, varistors, etc.

ASR-6000 시리즈는 GW Instek의 첫 독립실행형 유닛으로, AC 단상/3상 입력 및 출력 그리고 DC 전원 출력을 지원합니다.

ASR-6000 시리즈는 GW Instek의 첫 독립실행형 유닛으로, AC 단상/3상 입력 및 출력 그리고 DC 전원 출력을 지원합니다.

제품 리스트 : 고객의 필요에 따라 3종의 전력(5kW / 10kW / 15kW), 6종의 전압 (80V / 200V / 500V / 750V / 1000V / 1500V) 선택 가능

UPL10-1000 고전력 프로그래머블 DC파워 10V, 1000A, 10KW 3P 380V DC전원공급기 RS232, RS485, Support ModBus-RTU commands

기쿠수이 ・ KIKUSUI PXB SERIES 양방향 고용량 DC 파워서플라이 PXB SERIES Bidirectional High-Capacity DC Power Supply PXB20K 1500 PXB20K 1500KIKUSUI KIKUSUI PXB20K 1500 PXB20K 1500 키쿠수이 키쿠수이 PXB20K 1500 PXB20K 1500기쿠수이 기쿠수이 PXB20K 1500 PXB20K 1500기쿠스이 기쿠스이 PXB20K 1500 PXB20K 1500키쿠스이 키쿠스이 PXB20K 1500 PXB20K 1000 PXB20

FTPF series programmable AC power supply, using ARM+FPGA digital control, instantaneous waveform control and high frequency pulse width modulation (SPWM) technology, response speed up to 1mS, high output accuracy, low waveform distortion; With three-phase voltage independent adjustable, can edit harmonics, start phase adjustable, phase online variable, nonlinear load adaptability, with ON/OFF test function; Modular design concept, small volume and weight, convenient operation, cost-effective. Touch screen voltage, frequency, time setting; Provide embedded intelligent PC monitoring system, with RS232, RS485, TCP/IP network cable communication interface.

페이스 ・ FAITH FT8340 SERIES 양방향 배터리셀 시뮬레이션 파워서플라이 FT8340 SERIES bidirectional battery cell simulating power supply High Precision, Multi-Channel Battery Simulator: Up to 12 channels, each electrically isolated, for flexible testing and simulation Dual Quadrant Programmable: Supports both charging and

The FT8331 series features a standard 19-inch chassis, available in 2U and 3U enclosures, and offers LAN, RS485 and CAN communication interfaces for easy integration into R&D and automated test platforms, or can be used alone.