industrial equipment
/종합산업장비/전력/파워서플라이/GW INSTEK PSH 시리즈 프로그래머블 스위칭 DC 전원공급기

GW INSTEK PSH 시리즈 프로그래머블 스위칭 DC 전원공급기

• PSH Series PSH-2018A PSH-3610A ・ PSH-3620A ・ PSH-3630A

GW INSTEK PSH 시리즈 프로그래머블 스위칭 DC 전원공급기 이미지

• PSH Series PSH-2018A PSH-3610A ・ PSH-3620A ・ PSH-3630A

원산지중화민국 (대만) · REPUBLIC OF CHINA (TAIWAN) · 中華民國 (臺灣)
제조사GOOD WILL INSTRUMENT CO., LTD.
브랜드GW INSTEK
무게1kg

• PSH Series
 PSH-2018A
 PSH-3610A ・ PSH-3620A ・ PSH-3630A

특징

  • 넓은 입력 전압 범위 및 높은 역률(PF)
  • 고효율 및 고출력 밀도
  • 정전압 및 정전류 작동
  • 과전압 과전류 및 과열 보호
  • 낮은 리플 및 소음
  • 출력 온/오프 제어
  • 자가 테스트 및 소프트웨어 교정
  • 랩뷰 드라이버
  • 표준 인터페이스: RS-232C
  • 옵션 인터페이스: GPIB(IEEE-488.2)

Features

  • Wide input voltage range and high power factor (P.F)
  • high efficiency and high power density
  • Constant voltage and constant current operation
  • Over voltage over current and over temperature protection
  • Low ripple and noise
  • Output on/off control
  • Self-test and software calibration
  • LabView driver
  • Standard interface : RS-232C
  • Optional interface : GPIB ( IEEE-488.2 )

설명

PSH 시리즈는 360W ~ 1080W의 단일 출력, 프로그래밍 가능한 스위칭 DC 전원 공급 장치입니다. OVP, OCP 및 OTP는 전원 공급 장치와 부하를 예기치 않은 조건으로부터 보호합니다. 원격 감지는 부하 간의 케이블 손실을 보상하여 정밀도를 한 차원 더 높입니다. 동시 매개변수 출력이 있는 밝은 LCD로 손쉬운 작동이 가능합니다. 자체 테스트 및 소프트웨어 보정 기능도 유지 관리 노력을 줄여줍니다. RS-232C 또는 옵션인 GPIB 인터페이스를 통한 SCPI 명령 및 LabVIEW 드라이버 액세스를 통해 원격 제어 및 ATE 소프트웨어 개발이 가능합니다. 모듈식 아키텍처, 전용 후면 패널 출력 및 19인치 4U 랙 마운팅 옵션은 PSH 시리즈가 대형 시스템에 최적화되도록 합니다.

프로그래밍 가능한 스위칭 DC 전원 공급 장치

출력 와트(W)

출력 전압(V)

출력 암페어(A)

무게(kg)

PSH-2018A

360W

0~20V

0~18A

3.3kg

PSH-3610A

360W

0~36V

0~10A

3.3kg

PSH-3620A

720W

0~36V

0~20A

6.2kg

PSH-3630A

1080W

0~36V

0~30A

9.3kg

Description

The PSH-Series is single output from 360W to 1080W, programmable switching DC power supplies. OVP, OCP, and OTP protect the power supply and loads from unexpected conditions. Remote sensing adds an extra level of precision by compensating cable losses between loads. The bright LCD with simultaneous parameter outputs allows effortless operation. Self-test and software calibration features also reduce maintenance efforts. SCPI commands and LabVIEW driver access through the RS-232C or the optional GPIB interface allow remote control and ATE software development. Modular architecture, dedicated rear-panel output, and the 19 inch 4U rack mounting option ensure that the PSH-Series is optimized for large systems.

Programmable Switching D.C. Power Supply

Output Watts (W)

Output Volts (V)

Output Amps (A)

Weight (kg)

PSH-2018A

360W

0~20V

0~18A

3.3kg

PSH-3610A

360W

0~36V

0~10A

3.3kg

PSH-3620A

720W

0~36V

0~20A

6.2kg

PSH-3630A

1080W

0~36V

0~30A

9.3kg