서브 카테고리

Display method: Selectable from trend graph, digital display, and momentary value.

Register editing and mapping between RKC instruments and the PLC can be easily achieved on a PC.

Easily manages parameter set values and measured values of our controllers, indicators, and power controllers

Process alarm (high and low) can be assigned to four outputs.

SA100L SA100L RKC RKC SA100L SA100L 알케이씨 알케이씨 SA100L

Built-in power supply for sensor is available.

Up to 31 controllers can be multidrop connected over the RS-485 communication line.

The SA200L provides over/under-temperature protection by interrupting or removing the power from the process whenever the temperature goes above or below the set value (high limit or low limit). The output can be slected as an alarm or to interrupt power to the heater circuit. For safety reasons, the output is retained until reset operation is executed even when the measured value goes back to the normal range. Reset operation can be executed by front key operation, communication, or digital input. The SA200L measures the time while the measured value goes above/below the set value, and it retains the peak value.

Program setting is possible between 99 patterns by 10 segments and 10 patterns by x99 segments.

Various information is displayed on the large LCD.

Panel space requirement is reduced

Feedback control with 0.025 second sampling time enables controlling a fast changing process.