industrial equipment
전체 상품
8,518개 상품 · 492 / 710 페이지
RKC ZEAL2 PLC 레지스터 매핑 프로그램
Register editing and mapping between RKC instruments and the PLC can be easily achieved on a PC.
RKC PROTEM2 데이터 세팅 보조 프로그램
Easily manages parameter set values and measured values of our controllers, indicators, and power controllers
RKC SBR-EW100 & EW180 하이브리드 레코더
There are 80 types of display patterns to select; digital display, bar-graph display, etc.
RKC VGR-B100 페이퍼리스 레코더
Pressing the REC button starts recording.
RKC JB-150 / JB-16 / JB-160 / JB-703(704) 휴대용 온도센서 (유체 및 반고체 내부용)
The tip of the protection tube (sensing part) is shaped like a sharp needle so that the sensor can be easily stabbed into the measured object.
RKC ST-230(L) / ST-30(L) / ST-32(L) / ST-29(L,H,HL) 휴대용 온도센서 (고정 표면용)
The tilting head allows tight contact with the measured object for accurate surface temperature measurement.
RKC AE500 디지털 인디케이터
Process alarm (high and low) can be assigned to four outputs.
RKC SA100L 온도 리미트 컨트롤러
SA100L SA100L RKC RKC SA100L SA100L 알케이씨 알케이씨 SA100L
RKC AG500 디지털 인디케이터
Built-in power supply for sensor is available.
RKC CB100L 온도 리미트 컨트롤러
Up to 31 controllers can be multidrop connected over the RS-485 communication line.
RKC SA200L 온도 리미트 컨트롤러
The SA200L provides over/under-temperature protection by interrupting or removing the power from the process whenever the temperature goes above or below the set value (high limit or low limit). The output can be slected as an alarm or to interrupt power to the heater circuit. For safety reasons, the output is retained until reset operation is executed even when the measured value goes back to the normal range. Reset operation can be executed by front key operation, communication, or digital input. The SA200L measures the time while the measured value goes above/below the set value, and it retains the peak value.
RKC PF900 프로그램 컨트롤러 (온도 컨트롤러)
Program setting is possible between 99 patterns by 10 segments and 10 patterns by x99 segments.